Part No. 4103-313 (also written 4103/313) Transmission Yokes, 30/31 X 1.391 Splines, 1410 Series, 1.886" Hub Dia
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 4103-313 · 1410 Series Transmission Yoke
- Part number
- 4103-313
- Part type
- Transmission Yoke
- Condition
- New
- Series
- 1410
- Counter bore diameter
- 0
- Hub diameter
- 1.886
- Splines count diameter
- 30/31 X 1.391
- Center u-joint to end
- 8.110
- Weight
- 5.01 lb
Fitment
Same as 3-3-6661X
1410 series parts use 1.188" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 4103-313-01
4103-313 replaces or interchanges with 4103-313-01. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 4103-313
The product note "Same as 3-3-6661X" is a direct cross-reference to the Spicer/Dana catalog number for this yoke -- use 3-3-6661X when ordering from Spicer distribution or verifying against OEM service documentation. This is an important specification tool: when a vehicle service manual lists a yoke part number that is unfamiliar, cross-referencing to the industry standard catalog number confirms you have the right part before installation.
The 30/31-spline x 1.391" profile at 1.886" hub diameter is common across several 1410 series transmission and transfer case applications on domestic trucks. The 8.110" C/U-joint to end dimension is appropriate for mid-length driveshaft applications -- longer than the 6.938" on 4103-327 but shorter than the 10.150" on 4103-344. Confirm your application requires this length before ordering. No counterbore -- hub centering only. Pair with a 1410 U-joint.
Related Transmission Yokes in the 1410 series
See the full table
4103-301
Transmission Yokes, 1410 Series, 29/30 X 1.284 Splines, 2.161" Hub Dia
$95.39In stock
4103-302
Transmission Slip Yoke, 3-3-4181X Fits 1410 Series, 29/30 Splines x 1....
$94.51In stock
4103-311
Transmission Yokes, 1410 Series, 30/31 X 1.391 Splines, 1.886" Hub Dia
$79.45In stock
4103-317
Transmission Yokes, 1410 Series, Splines: 30/31 X 1.615 Splines, 2.201...
$94.16In stock
4103-318
Transmission Yoke 1410 series 3-3-4391X DODGE Fits various Chrysler,...
$70.38In stock
4103-322
Transmission Yoke Chevy 1410 Series 31/32 Splines, 3-3-01646X
$80.04In stock
4103-327
Transmission Yokes, 1410 Series, 31/32 X 1.378 Splines, 1.886" Hub Dia
$80.00In stock
4103-342
Transmission Yokes, 1410 Series, 33/34 X 1.551 Splines, 2.086" Hub Dia
$78.06In stock
4103-313 questions
What series is 4103-313?
4103-313 is a 1410 series transmission yoke. Nominal 1410 dimensions are 1.188" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 4103-313 have?
4103-313 is cut for 30/31 X 1.391 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.
What part numbers does 4103-313 replace?
4103-313 cross-references to 4103-313-01. Interchange data is for reference; compare the dimensions before substituting.
Is 4103-313 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.