Part No. 4103-341 (also written 4103/341) Transmission Slip Yoke, Fits 1410 Series, 32/34 Splines x 1.750 Spline Dia - 40038536
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 4103-341 · 1410 Series Transmission Yoke
- Part number
- 4103-341
- Part type
- Transmission Yoke
- Condition
- New
- Brand
- UDS
- Series
- 1410
- Counter bore diameter
- 0
- Hub diameter
- 2.300
- Splines count diameter
- 32/34 X 1.750
- Center u-joint to end
- 9.551
- Weight
- 7.43 lb
Fitment
Dodge
1410 series parts use 1.188" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 4103-341-01
4103-341 replaces or interchanges with 4103-341-01. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 4103-341
4103-341 -- UDS 1410 Slip Yoke for Dodge, 32/34-Spline x 1.750", 9.551" CJ-to-End
Dodge used both 32-spline and 34-spline output shafts in their heavy-duty transmission lineup depending on model year and transmission variant. The 4103-341 covers both: its 1.750-inch spline bore is machined to accept either count at that diameter. However, if your shaft has a different count -- 29, 30, or 31 splines -- this bore will not engage. Count your shaft splines before ordering; the correct number must be exact.
The 1410 series is a step up from 1350 in torque capacity, using a wider U-joint (4.188 inches vs 3.625 inches) with the same 1.188-inch cap diameter. CJ-to-end is 9.551 inches, giving long spline engagement for towing and loaded applications. Hub diameter: 2.300 inches.
- Part Number: 4103-341 (UDS)
- Series: 1410
- Application: Dodge
- Splines: 32 or 34 x 1.750"
- CJ to End: 9.551"
- Hub Diameter: 2.300"
Full Dodge transmission Slip Yoke inventory including 1350, 1410, and 1550 series.
Related Transmission Yokes in the 1410 series
See the full table
4103-301
Transmission Yokes, 1410 Series, 29/30 X 1.284 Splines, 2.161" Hub Dia
$95.39In stock
4103-302
Transmission Slip Yoke, 3-3-4181X Fits 1410 Series, 29/30 Splines x 1....
$94.51In stock
4103-311
Transmission Yokes, 1410 Series, 30/31 X 1.391 Splines, 1.886" Hub Dia
$79.45In stock
4103-313
Transmission Yokes, 30/31 X 1.391 Splines, 1410 Series, 1.886" Hub Dia
$81.86In stock
4103-317
Transmission Yokes, 1410 Series, Splines: 30/31 X 1.615 Splines, 2.201...
$94.16In stock
4103-318
Transmission Yoke 1410 series 3-3-4391X DODGE Fits various Chrysler,...
$70.38In stock
4103-322
Transmission Yoke Chevy 1410 Series 31/32 Splines, 3-3-01646X
$80.04In stock
4103-327
Transmission Yokes, 1410 Series, 31/32 X 1.378 Splines, 1.886" Hub Dia
$80.00In stock
4103-341 questions
What series is 4103-341?
4103-341 is a 1410 series transmission yoke. Nominal 1410 dimensions are 1.188" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 4103-341 have?
4103-341 is cut for 32/34 X 1.750 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.
What part numbers does 4103-341 replace?
4103-341 cross-references to 4103-341-01. Interchange data is for reference; compare the dimensions before substituting.
Is 4103-341 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.