4-82-211 1550 Series Yoke Shaft

零件号 4-82-211 叉轴, 1550系列, 花键直径 2.000", 16 花键

$411.81

现货

大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。

  • 配件订单满 $ 免运费1,000
  • 14天退货
  • 适配咨询: (813) 524-6491

规格 4-82-211 · 1550 Series Yoke Shaft

测量方法将鼠标指向字母即可查看其尺寸
ADECB
零件编号
4-82-211
零件类型
叉轴
状态
全新
系列
1550
花键数
16
花键长度
3.000
中心至端部
6.120
花键直径
2.000
重量
6.77 lb

适配性

1550 系列零件使用 1.375" 万向节轴承盖,卡簧到卡簧宽度为 4.875" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。

按您的邮编估算运费

计算运费

从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。

佛罗里达州本地自提 — 免费

关于 4-82-211

Q: The 4-82-211 shows 2.000" spline diameter -- other 1550-series yoke shafts use 1.750". Is this correct?
A: Yes. The 1550 series supports both 1.750" and 2.000" spline diameters depending on the mating sleeve specification. The 4-82-211 uses a 2.000" spline -- do not confuse with the 4-82-211's 1.750" siblings. Verify the mating sleeve bore before ordering.

Q: What are the other specs?
A: 16 splines, 3.000" spline engagement length, 6.120" CL-to-end. This is a compact variant in the 1550 series with the larger 2.000" spline bore.

Q: Where is this stub shaft typically used?
A: Applications that require the 1550-series U-joint capacity but use a larger-OD transmission or transfer case output shaft than the standard 1.750" profile. Industrial pump drives and specialty vehicle drivelines commonly use the 2.000" profile in this series.

1550 系列中相关的 叉轴

查看完整表格

4-82-211 问题

4-82-211 属于哪个系列?

4-82-211 是 1550 系列 叉轴。1550 系列标称尺寸为 1.375" 轴承盖,卡簧到卡簧宽度为 4.875". 订购前请测量旧万向节的轴承盖直径以确认系列。

4-82-211 有多少个花键齿?

4-82-211 在 2.000" 花键直径上有 16 个花键。 请清点输出轴上的花键并测量大径以确认。

本翻译由 AI 生成,可能包含错误。如有不明之处,请致电 (813) 524-6491 或切换至英语。