Part No. 4-82-211 Yoke Shafts, 1550 Series, 2.000" Splines Dia, 16 Spline
In stock
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 4-82-211 · 1550 Series Yoke Shaft
- Part number
- 4-82-211
- Part type
- Yoke Shaft
- Condition
- New
- Series
- 1550
- Splines count
- 16
- Splines length
- 3.000
- CL to end
- 6.120
- Splines diameter
- 2.000
- Weight
- 6.77 lb
Fitment
1550 series parts use 1.375" u-joint bearing caps on a 4.875" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 4-82-211
Q: The 4-82-211 shows 2.000" spline diameter -- other 1550-series yoke shafts use 1.750". Is this correct?
A: Yes. The 1550 series supports both 1.750" and 2.000" spline diameters depending on the mating sleeve specification. The 4-82-211 uses a 2.000" spline -- do not confuse with the 4-82-211's 1.750" siblings. Verify the mating sleeve bore before ordering.
Q: What are the other specs?
A: 16 splines, 3.000" spline engagement length, 6.120" CL-to-end. This is a compact variant in the 1550 series with the larger 2.000" spline bore.
Q: Where is this stub shaft typically used?
A: Applications that require the 1550-series U-joint capacity but use a larger-OD transmission or transfer case output shaft than the standard 1.750" profile. Industrial pump drives and specialty vehicle drivelines commonly use the 2.000" profile in this series.
Related Yoke Shafts in the 1550 series
See the full table
4-82-191
Yoke Shafts, 1480 Series, 2.500" Splines dia, 16 Spline
$353.08In stock
4-82-371U
Yoke Shafts, 1550 Series, 1.750" Splines Dia, 16 Spline
$334.02In stock
4-82-411-1U
Yoke Shafts, 1550 Series, 1.750" Splines Dia, 16 Spline
$363.69In stock
4-82-561U
Yoke Shafts, 1550 Series, 1.750" Splines Dia, 16 Spline
$473.59In stock
3R82-321
Yoke Shafts, 3R Series, 1.375" splines dia, 32 Spline
$72.28In stock
3R82-322
Yoke Shafts, 3R Series, 1.375" Splines Dia, 31/32 Spline
$108.82In stock
40006885
Yoke Shafts, 3R Series, 1.375" Splines dia, 32 Spline
$84.56In stock
40020347
Yoke Shafts, 3R Series, 1.375" Splines Dia, 31/32 Spline
$108.82In stock
4-82-211 questions
What series is 4-82-211?
4-82-211 is a 1550 series yoke shaft. Nominal 1550 dimensions are 1.375" bearing caps on a 4.875" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 4-82-211 have?
4-82-211 has 16 splines on a 2.000" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.