零件号 4-3-1241KX 滑动叉 1550系列, 花键: 1.750x16, 中心线至端部: 6.875
现货16 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 4-3-1241KX · 1550 Series Slip Yoke
- 零件编号
- 4-3-1241KX
- 零件类型
- 滑动叉
- 状态
- 全新
- 品牌
- UDS
- 系列
- 1550
- 花键数
- 16
- 万向节中心到端部
- 6.875
- 花键直径
- 1.750"
- 重量
- 7.25 lb
适配性
Heavy Duty
1550 系列零件使用 1.375" 万向节轴承盖,卡簧到卡簧宽度为 4.875" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
互换 / 交叉参考
- N4-3-1241KX
- P4-3-1241KX
4-3-1241KX 可替换或互换自 N4-3-1241KX, P4-3-1241KX. 交叉参考编号仅供识别;购买替代件前,请先比对上方的系列、花键和螺栓孔距尺寸。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
4-3-1241KX 的替代零件
适配相同,编号或品牌不同。替换前请查看备注。
| 添加 | 图片 | 零件号 | 价格 | 系列 | 万向节中心到端部 | 花键数 | 花键直径 | 备注 |
|---|---|---|---|---|---|---|---|---|
![]() |
S4-3-1241KX |
$213.09
|
1550 | 6.875 | 16 | 1.750" | Spicer |
关于 4-3-1241KX
The 4-3-1241KX slip yoke is engineered for precise axial travel within the driveshaft assembly while maintaining the rotational torque path between transmission output and driveshaft. Rated for the 1550 series, it features 16 splines at 1.750"" diameter with a center U-joint-to-end dimension of 6.875".
Function of the Slip Yoke
Slip yokes serve a critical suspension articulation function: as the drivetrain moves through suspension travel, the driveshaft must lengthen and shorten slightly. The splined bore of the slip yoke slides on the transmission tail shaft or transfer case output shaft, accommodating this length change without binding. Worn slip yoke splines cause driveline backlash, vibration, and eventually transmission seal damage. The 4-3-1241KX replaces worn units with fresh, precise splines.
Specifications
| Parameter | Value |
|---|---|
| Part Number | 4-3-1241KX |
| Series | 1550 |
| Spline Count | 16 |
| Spline Diameter | 1.750"" |
| Center U-Joint to End | 6.875" |
| Application Notes | Heavy Duty |
Spline Fit and Seal Interaction
The 16-spline, 1.750"" bore must match the transmission output shaft spline profile exactly. A loose fit causes clunking under load reversal; an oversized bore will not engage the shaft at all. The slip yoke also rides against the transmission extension housing seal -- a yoke with worn or scored sliding surfaces will damage the seal and allow fluid loss. The 4-3-1241KX presents a clean, ground surface finish on the sliding area to protect the seal.
Installation Checklist
- Drain or contain transmission fluid before removing the yoke to prevent spillage
- Inspect extension housing seal; replace if it shows cracking or hardening
- Lightly oil splines before installing new yoke onto output shaft
- Confirm U-joint bore alignment with driveshaft front yoke before assembly
- Check for smooth axial movement through full suspension travel range
- Verify no transmission fluid leaks after a test drive
Availability
Universal Driveshafts stocks the complete 1550 series slip yoke family. The 4-3-1241KX ships same-day. For specialty applications or non-standard spline profiles, our engineering team can advise on custom yoke options.
Not sure which slip yoke you need? Our transmission slip yoke guide covers spline counts, styles, and how to measure.
1550 系列中相关的 滑动叉
查看完整表格
S4-3-1241KX
滑动叉, 1550系列, 花键直径 1.750", Center 万向节 To End 6.875
$213.09现货
5503-241
滑动叉, 花键直径 1.562", 23/24 花键, Center 万向节 To End 8.445
$91.36现货
4-3-1431KX
滑动叉 1550系列, 花键: 1.750x16, 中心线至端部: 10.062
$90.94现货
10-3-18KX
滑动叉 1000系列 1.250 X 16 花键 5.500 中心线至端部
$20.48现货
1403-16
滑动叉, 1100系列, 花键直径 1.063", Center 万向节 To End 4.313
$60.99现货
3003-16
滑动叉 1300系列, 花键直径: 1.375, 花键齿数: 16
$97.08现货
4-3-1241KX 问题
4-3-1241KX 属于哪个系列?
4-3-1241KX 是 1550 系列 滑动叉。1550 系列标称尺寸为 1.375" 轴承盖,卡簧到卡簧宽度为 4.875". 订购前请测量旧万向节的轴承盖直径以确认系列。
4-3-1241KX 有多少个花键齿?
4-3-1241KX 在 1.750" 花键直径上有 16 个花键。 请清点输出轴上的花键并测量大径以确认。
4-3-1241KX 可替代哪些零件号?
4-3-1241KX 交叉对应于 N4-3-1241KX, P4-3-1241KX. 互换数据仅供参考;替代前请比对尺寸。
4-3-1241KX 有现货吗?
是的。佛罗里达仓库有 16 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。