3504-10 1350 Series End Yoke

部品番号 3504-10 (別表記 3504/10) エンドヨーク, 1350シリーズ, スプライン径 1.188", ハブ径 1.875""

$121.07

在庫あり1 件の出荷準備完了

在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。

  • 部品注文の送料無料金額 $1,000
  • 14日以内返品可能
  • 適合に関するサポート: (813) 524-6491

仕様 3504-10 · 1350 Series End Yoke

計測方法文字にカーソルを合わせると、その寸法が表示されます
ABCFGED
部品番号
3504-10
パーツタイプ
エンドヨーク
状態
新品
シリーズ
1350
スタイル
BS
ハブ径
1.875
ユニバーサルジョイントから端部まで
3.125
スプライン径
1.188
スプライン数
10
通し穴
1.656
ボアタイプ
splined
重量
2.46 lb

適合性

STRAP PART NUMBER: 3-70-28, CHRYSLER 8.75

1350 シリーズのパーツには 1.188" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.625" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。

互換品 / クロスレファレンス

  • 3-4-2051-1

3504-10 は 3-4-2051-1 と互換性があります。相互参照番号は識別用です。交換前に、上記のシリーズ、スプライン、ボルトパターンの寸法をご確認ください。

郵便番号への送料を見積もる

送料を計算

フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。

フロリダでの店頭受取 — 無料

3504-10 について

Not all end yokes are created equal -- the material and machining process determine whether a yoke lasts 200,000 miles or fails in 20,000. The 3504-10 is a UDS 1350 Series end yoke manufactured from high-grade steel with machined spline bores, precision bearing seats, and controlled snap ring grooves. It is the correct choice for any drivetrain that demands durability over the long haul.

Material and Construction

The raw material for this yoke is selected for its combination of tensile strength and machinability. After rough forming, the spline bore, hub, and bearing seats are finish-machined on CNC equipment to hold tolerances that exceed OEM specifications. The BS snap ring groove is cut to a consistent depth and width, ensuring that the snap ring seats fully and cannot back out under vibration.

  • High-grade steel construction -- resists deformation under high-torque loads
  • CNC-machined bearing bores -- consistent, round seats for U-joint caps
  • Controlled spline form -- 1.188" diameter, 10-spline interface
  • Protective coating -- resists corrosion during storage and service life
Specification Value
Series 1350 Series
Spline Diameter 1.188"
Spline Count 10
Hub Diameter 1.875"
Center U-Joint to End 3.125"
Through Hole Diameter 1.656"
Snap Ring Style BS
Application Note CHRYSLER 8.75
Brand UDS

Dimensional Reference

Every dimension on this yoke has a functional purpose. The 1.875" hub diameter determines how the yoke registers against the output shaft seal or retainer. The 3.125" center-to-end measurement affects driveshaft operating length. The 1.656" through hole prevents interference with internal shafts or speedometer cables. None of these dimensions can be ignored when selecting a replacement.

Application and Installation

This yoke is designed for CHRYSLER 8.75. Installation requires a clean output shaft free of nicks, corrosion, or damaged splines. Inspect the snap ring groove in the shaft before installing the new yoke. Torque the retaining hardware to specification -- do not rely on thread friction alone to retain the yoke under high-RPM operation.

Pair with a fresh 1350 Series U-joint for a complete driveline service. Reusing an old U-joint with a new yoke negates the benefits of the replacement.

Part 3504-10 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.

1350 シリーズの関連する エンドヨーク

全一覧表を見る

3504-10 ご質問

3504-10 はどのシリーズですか?

3504-10 は 1350 シリーズの エンドヨーク です。 1350 シリーズの公称寸法は 1.188" ベアリングキャップです スナップリング間幅 3.625"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。

3504-10 のスプライン数はいくつですか?

3504-10 はスプライン径 1.188" に 10 スプラインを備えています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。

3504-10 はどの部品番号の代替品ですか?

3504-10 は 3-4-2051-1 とクロスリファレンス対応しています。互換データは参考情報です。交換前に寸法をご確認ください。

3504-10 の在庫はありますか?

はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。

この翻訳はAIによって作成されたものであり、エラーが含まれている可能性があります。ご不明な点がございましたら、(813) 524-6491にお電話いただくか、英語に切り替えてください。