Part No. 3504-08 (also written 3504/08) End Yoke, 1350 Series, 1.218" Splines Dia, 28 Spline
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3504-08 · 1350 Series End Yoke
- Part number
- 3504-08
- Part type
- End Yoke
- Condition
- New
- Series
- 1350
- Style
- UB
- Hub diameter
- 1.812
- Splines count
- 28
- Splines diameter
- 1.218
- CJ to end
- 4.000"
- Bore type
- splined
- Through hole
- 2.244
- Weight
- 3.8 lb
Fitment
FORD 9, U BOLT PART NUMBER: 3-94-18
1350 series parts use 1.188" u-joint bearing caps on a 3.625" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3504-08
3504-08 is a UDS 1350 Series end yoke. Spline diameter: 1.218". Spline count: 28. Hub diameter: 1.812". Retention style: UB. This is the replacement specification for 1350 Series output shafts in FORD 9 applications. If your numbers match, this is your part.
Engineering Specifications
All dimensions are as-machined. Match each to your output shaft before ordering. No modification required for correct-fit installations.
| Specification | Value |
|---|---|
| Series | 1350 Series |
| Spline Diameter | 1.218" |
| Spline Count | 28 |
| Hub Diameter | 1.812" |
| Center U-Joint to End | 4.000" |
| Through Hole Diameter | 2.425" |
| Snap Ring Style | UB |
| Application Note | FORD 9 |
| Brand | UDS |
Snap Ring and Retention Detail
The UB retention system on this yoke uses a standard snap ring seated in the output shaft groove. The groove geometry dictates which snap ring style is required -- do not substitute ISR hardware in an OSR groove or vice versa. Snap ring ejection under load is a catastrophic failure mode that can damage adjacent driveline components.
Through bore ID: 2.425" -- required clearance dimension for applications with internal shafts.
Ordering and Cross-Reference
Part number 3504-08 corresponds to UDS part number 3504-08. Application: FORD 9 Cross-reference against your existing yoke OEM part number to confirm compatibility before placing an order.
This yoke is stocked at Universal Driveshafts and ships the same business day when ordered before the daily cutoff. Combine with a 1350 Series U-joint for a complete output shaft service kit.
Part 3504-08 is a UDS product. Universal Driveshafts stocks a complete range of 1350 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.
New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.
Related End Yokes in the 1350 series
See the full table
3504-04
End Yoke, 1.312" Splines Dia, 2.110" Hub Dia, 30 Spline
$114.87In stock
3504-09
End Yoke, 1350 Series, 1.343" Splines Dia, 1.812" Hub Dia
$121.02In stock
N3-4-JK08
End Yoke, 1350 Series, 1.250" Splines Dia, 1.85" Hub Dia
$111.55In stock
3504-03
End Yoke, 1350 Series, 1.343" Splines Dia, 1.812" Hub Dia
$102.26In stock
3504-101
End Yoke, 1350 Series, 1.375" Splines Dia, 1.750" Hub Dia
$118.59In stock
3504-85
End Yoke, 1350 Series, 1.312" Splines Dia, 1.94" Hub Dia
$108.75In stock
3504-10
End Yoke, 1350 Series, 1.188" Splines Dia, 1.875" Hub Dia"
$121.07In stock
3504-243
End Yoke, 1350 Series, 1.250" Splines Dia, 1.876" Hub Dia
$107.73In stock
3504-08 questions
What series is 3504-08?
3504-08 is a 1350 series end yoke. Nominal 1350 dimensions are 1.188" bearing caps on a 3.625" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 3504-08 have?
3504-08 has 28 splines on a 1.218" spline diameter. Count the splines on the output shaft and measure across the major diameter to confirm.
Is 3504-08 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.