Part No. 3303-232 (also written 3303/232) Transmission Yokes, 1330 Series, 23 X 1.200 Splines, 1.575" Hub Dia
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3303-232 · 1330 Series Transmission Yoke
- Part number
- 3303-232
- Part type
- Transmission Yoke
- Condition
- New
- Series
- 1330
- Counter bore diameter
- 0
- Hub diameter
- 1.575
- Splines count diameter
- 23 X 1.200
- Center u-joint to end
- 6.319
- Weight
- 3.62 lb
Fitment
TOYOTA
1330 series parts use 1.062" u-joint bearing caps on a 3.625" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 2-3-02274X
3303-232 replaces or interchanges with 2-3-02274X. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3303-232
The Toyota 23-spline x 1.200" output profile spans both 1330 and 1350 series (3303-232 and 3503-231) -- the series selection is based on the vehicle's OEM driveshaft specification. The 6.319" C/U-joint to end on 3303-232 is shorter than the 7.106" on 3503-231, indicating different Toyota models or model years require each length.
Confirm model year, transmission type, and wheelbase for exact fitment. Land Cruiser FJ40/FJ55/FJ60 series and various Hilux generations use 23-spline outputs -- the correct yoke series and length depend on the specific vehicle configuration. The 1.575" hub OD is consistent across the Toyota 23-spline family. Replace the output seal at each yoke removal.
Related Transmission Yokes in the 1330 series
See the full table
3303-327
Transmission Yokes, 1330 Series, 31/32 X 1.378 Splines, 1.700" Hub Dia
$60.93In stock
3303-231
Transmission Yoke 1330 Series, Splines: 1.220 Spline Count 27/28, Hub...
$101.08In stock
3303-251
Transmission Yokes, 1330 Series, 24/25 X 1.113 Splines, 1.375" Hub Dia
$69.67In stock
3303-282
Transmission Yokes, 1330 Series, 27/28 X 1.220 Splines, 1.600" Hub Dia
$71.95In stock
3303-283
Transmission Yokes, 1330 Series, 27/28 X 1.220 Splines, 1.500" Hub Dia
$72.05In stock
3303-301
Transmission Yokes, 1330 Series, 29/30 X 1.284 Splines, 1.681" Hub Dia
$72.71In stock
3303-32
Transmission Yokes, 1330 Series, 31/32 X 1.378 Splines, 1.886" Hub Dia
$94.07In stock
3303-321
Transmission Yokes, 1330 Series, 31/32 X 1.378 Splines, 1.886" Hub Dia
$91.65In stock
3303-232 questions
What series is 3303-232?
3303-232 is a 1330 series transmission yoke. Nominal 1330 dimensions are 1.062" bearing caps on a 3.625" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 3303-232 have?
3303-232 is cut for 23 X 1.200 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.
What part numbers does 3303-232 replace?
3303-232 cross-references to 2-3-02274X. Interchange data is for reference; compare the dimensions before substituting.
Is 3303-232 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.