零件号 2752-8734 (也写作 2752/8734) CV双联节头, CVJ 系列, 端面直径 2.344", 定位口直径 1.614
现货1 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 2752-8734 · CV Double Joint Head
- 零件编号
- 2752-8734
- 零件类型
- CV Double Joint Head
- 状态
- 全新
- 样式/系列
- CVJ
- 螺栓圆周直径
- N/A
- 螺栓孔直径
- N/A
- 对接直径
- 2.344
- 管径和壁厚
- 2.500X0.083
- 端部到焊缝
- 3.250
- 定位直径
- 1.614
- 重量
- 3.58 lb
适配性
34 Spline, M39X1.5 THREADED, BMW
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 2752-8734
CV joint head selection hinges on three factors: joint series, bolt circle geometry, and tube weld specification. The 2752-8734 aligns with the CVJ series bearing trunnion size, carries a N/A bolt circle for direct flange attachment, and welds to 2.500X0.083 tube for a complete high-angle driveshaft assembly.
Dimensional Specifications
| Parameter | Value |
|---|---|
| Series | CVJ |
| Bolt Circle Diameter | N/A" |
| Butt Diameter | 2.344" |
| End to Weld | 3.250" |
| Tube Diameter x Wall | 2.500X0.083" |
| Pilot Diameter | 1.614" |
| Notes / Application | 34 Spline, M39X1.5 THREADED, BMW |
| Part Number | 2752-8734 |
How CV Double Joints Eliminate Vibration
A double-Cardan joint achieves constant-velocity motion by arranging two single U-joints in series, phased so that each joint's velocity variation is equal and opposite to the other's. A centering ball-and-socket assembly maintains the midpoint angle precisely at half the total operating angle. The result: velocity error at the first joint is exactly cancelled by the second joint, and the output shaft rotates at a perfectly constant speed regardless of the total operating angle -- up to the joint's rated maximum.
The 2752-8734 is rated for continuous operation at angles typical of lifted trucks and transfer case applications, and is grease-serviceable through standard U-joint Zerk fittings to extend service intervals in demanding environments.
Tube Welding and Assembly Considerations
The butt-weld end of the 2752-8734 is machined for 2.500X0.083 driveshaft tube. Proper weld preparation -- clean, square-cut tube ends, correct gap, and a preheat in cold conditions -- is as important as the joint selection itself. A poorly welded joint head introduces runout that no amount of dynamic balancing can fully correct. After welding, the completed shaft should be balanced to within 0.1 oz-in per foot of shaft length for best NVH results.
- Verify the bolt circle diameter and hole count match the companion flange before final assembly
- Grease the centering socket and both bearing crosses at initial assembly and every 30,000 miles thereafter
- Check for centering socket wear if vibration returns after lubrication -- a worn socket allows the midpoint angle to drift, degrading velocity cancellation
- Maintain proper driveshaft phasing (yoke ears in-phase) when assembling the complete shaft
Order from a Driveline Specialist
Universal Driveshafts stocks the 2752-8734 and the full range of CVJ CV joint components for same-day shipment. Our driveline engineers can assist with angle measurement, tube selection, and complete shaft specifications for custom build projects. Contact us with your vehicle's operating angle and torque requirement for a personalized recommendation.
相关的 CV Double Joint Heads
查看完整表格
027SG80002
CV双联节头, 定位口直径 3.819", 螺栓圆直径 3.386", 螺栓孔直径 0.330
$363.88现货
027SG80004
CV双联节头, 螺栓圆直径 3.386", 螺栓孔直径 330", 定位口直径 3.937
$322.65现货
032SG80002
CV双联节头, CVJ 系列, 螺栓圆直径 3.583", 端面直径 1.571
$351.72现货
2552-8780
CV双联节头, CVJ 系列, 端面直径 2.344", 管径×壁厚 2.500X0.083
$119.98现货
2690-100
CV双联节头, CVJ 系列, 螺栓圆直径 3.386", 端面直径 2.375
$334.10现货
3190-100
CV双联节头, CVJ 系列, 螺栓圆直径 3.386", 端面直径 2.344
$181.15现货
3190-107
CV双联节头, CVJ 系列, 端面直径 1.571", 定位口直径 4.094
$351.83现货
9994-01
CV双联节头, CVJ 系列, 螺栓圆直径 3.925", 定位口直径 2.875F
$240.64现货
2752-8734 问题
2752-8734 有现货吗?
是的。佛罗里达仓库有 1 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。