Part No. 2604-27 (also written 2604/27) End Yoke, 7260 Series, 1.172" Splines Dia, 1.688" Hub Dia

Every driveshaft system is only as strong as its weakest yoke. The 2604-27 is a UDS 7260 Series end yoke built to handle the torsional demands of performance applications -- from high-horsepower street builds to off-road rigs that flex the suspension to its limits. With a 1.172" spline interface and precision-machined bearing seats, this yoke transfers power cleanly without the slop that kills U-joints prematurely.

Performance-Grade Construction

The 7260 Series yoke series was developed to handle loads beyond light-duty OEM specifications. The 2604-27 carries the full load rating of the 7260 Series system, making it appropriate for high-torque applications including turbocharged and supercharged drivetrains, towing configurations, and competition use.

• Full 7260 Series torque rating -- no derating for special applications
• Precision bearing bores -- eliminate U-joint cap rocking that causes premature wear
• Snap ring style: BS -- positive retention under shock loading
• Hub diameter: 1.688" -- correct registration against diff or transfer case seal

Specifications

Performance fitment requires exact dimensional matching. The 2604-27 is built to the following specs -- particularly relevant for CHRYSLER 7.25 - 8.25 STRAP KIT PART NUMBER: 2670-10:

Pairing for Maximum Drivetrain Life

The weakest link in any driveshaft assembly determines its service life. Pairing a fresh 2604-27 end yoke with a new 7260 Series U-joint and a properly balanced driveshaft eliminates the three most common failure points. For high-horsepower builds, also inspect the driveshaft tube for straightness and the slip yoke for wear -- replacing a yoke without addressing these components leaves the system vulnerable to the same vibration-induced failure.

Center-to-end measurement of 2.750" must be accounted for when calculating driveshaft operating length after suspension lifts or drivetrain swaps.

Part 2604-27 is a UDS product. Universal Driveshafts stocks a complete range of 7260 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.