系列 7260 BS

零件号 2604-10 (也写作 2604/10) 端叉, 7260系列, 花键直径 1.188", 轮毂直径 1.875"

Q: 2604-10 属于哪个系列?

2604-10 是 7260 系列 端叉。7260 系列标称尺寸为 1.078" 轴承盖，卡簧到卡簧宽度为 2.125". 订购前请测量旧万向节的轴承盖直径以确认系列。

Q: 2604-10 有多少个花键齿?

2604-10 在 1.188" 花键直径上有 10 个花键。 请清点输出轴上的花键并测量大径以确认。

$107.67

现货1 件准备发货

大多数现货配件在 2pm EST 前下单可当天发货；处理时间可能有所不同。

配件订单满 $ 免运费1,000
14天退货
适配咨询： (813) 524-6491

规格 2604-10 · 7260 Series End Yoke

测量方法将鼠标指向字母即可查看其尺寸

零件编号: 2604-10
零件类型: 端叉
状态: 全新
系列: 7260
样式: BS
轮毂直径: 1.875
通孔: 1.500"
花键直径: 1.188
花键数: 10
孔类型: splined
万向节到端部: 3.350"
重量: 2.53 lb

适配性

CHRYSLER 8.75 - STRAP KIT PART NUMBER : 2670-10

7260 系列零件使用 1.078" 万向节轴承盖，卡簧到卡簧宽度为 2.125" （标称）。订购前请确认配对万向节叉或万向节上的轴承盖直径。

所有 7260 系列零件所有端叉向传动系统技术人员咨询适配性

按您的邮编估算运费

计算运费

从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。

佛罗里达州本地自提 — 免费

关于 2604-10

When comparing aftermarket end yokes, what matters is dimensional precision and material consistency -- not packaging or price point. The 2604-10 from UDS is built to the 7260 Series OEM specification: 1.188" spline bore, 1.875" hub diameter, and BS snap ring retention. These numbers are non-negotiable -- they either match your output shaft or they don't.

OEM vs. Aftermarket: What Changes

OEM end yokes are manufactured to tight tolerances with controlled heat treatment for the specific vehicle model. The UDS 2604-10 replicates these tolerances in an aftermarket context, using the same 7260 Series dimensional standard that OEM suppliers use. The practical difference is availability: this part ships from Universal Driveshafts' inventory, while OEM sources may require dealer ordering with extended lead times.

Spline interface: 1.188" x 10 splines -- matches OEM output shaft
Snap ring type: BS -- same retention method as factory
Hub diameter: 1.875" -- registers against factory seal bore
Note: CHRYSLER 8.75 - STRAP KIT PART NUMBER : 2670-10

Specification	Value
Series	7260 Series
Spline Diameter	1.188"
Spline Count	10
Hub Diameter	1.875"
Center U-Joint to End	3.350"
Through Hole Diameter	1.500"
Snap Ring Style	BS
Application Note	CHRYSLER 8.75 - STRAP KIT PART NUMBER : 2670-10
Brand	UDS

Specification Table

Full dimensional data for the 2604-10. Every measurement is an as-machined figure, not a nominal or nominal +/- value.

Selecting the Correct Part

The most common ordering error for end yokes is confusing similar-sounding series numbers or assuming that all yokes for a given vehicle are interchangeable. Verify these specifics before ordering the 2604-10: output shaft spline diameter must be 1.188", spline count must be 10, and the shaft's snap ring groove must match the BS style. Through bore clearance (1.500") is especially important if your application routes a cable or shaft through the output yoke bore.

Part 2604-10 is a UDS product. Universal Driveshafts stocks a complete range of 7260 Series end yokes, U-joints, and driveshaft components. Contact our technical team for fitment assistance.

New to end yokes? Our end yoke guide explains splines, snap-ring styles, and how to measure.