Part No. P3-2-479U Flange Yokes, 1480 Series, Bolt Circle Dia 4.750", Cj To Flat 2.000
In stock50+ ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications P3-2-479U · 1480 Series Flange Yoke
- Part number
- P3-2-479U
- Part type
- Flange Yoke
- Condition
- New
- Series
- 1480
- Pilot diameter
- M, 3.750
- CJ to flat
- 2.000
- Bolt hole diameter
- 0.500
- Bolt circle diameter
- 4.750
- Bolt holes
- 4
- Weight
- 3.43 lb
Fitment
Rec Bolt Pattern
1480 series parts use 1.375" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Interchange / cross-reference
- 3-2-479
- N3-2-479
P3-2-479U replaces or interchanges with 3-2-479, N3-2-479. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
Alternative parts for P3-2-479U
Same fitment, another number or brand. Check the notes before you substitute.
About P3-2-479U
P3-2-479 Flange Yoke, 1480 series. Series: 1480; Pilot Dia: 3.750 / M; Bolt Circle Dia: 4.750; Bolt Holes: 4; Bolt Hole Dia: 0.500; Cj To Flat: 2.000.
Rec Bolt Pattern
Check every dimension against the part you are replacing before ordering. Not sure? Call us with the part number stamped on your old part.
Related Flange Yokes in the 1480 series
See the full table
4802-1200
Flange Yokes, 1480 Series, Bolt Hole Dia 0.000", Cj To Flat 2.875
$94.55In stock
4802-1242
Flange Yokes, 1480 Series, Bolt Circle Dia 3.950", Bolt Hole Dia 0.480
$91.98In stock
4802-1244
1480 Series with Isuzu Face 35 x 105 mm to 1480 34.9 x 106 Conversion...
$70.29In stock
4802-1260
Flange Yokes, 1480 Series, Bolt Circle Dia 4.000", Pilot Dia 3.250, F
$115.28In stock
4802-1280
Flange Yokes, 1480 Series, Bolt Circle Dia 4.000", Pilot Dia 2.950, F
$117.71In stock
4802-1380
Flange Yokes, 1480 Series, Bolt Circle Dia 4.409", Pilot Dia 3.248, M
$48.54In stock
4802-1869
Flange Yokes, 1480 Series, Bolt Circle Dia 4.750", Pilot Dia 2.953, F
$60.54In stock
4802-371
Flange Yokes, 1480 Series, Bolt Circle Dia 4.750", Pilot Dia 3.750, M
$57.20In stock
P3-2-479U questions
What series is P3-2-479U?
P3-2-479U is a 1480 series flange yoke. Nominal 1480 dimensions are 1.375" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What bolt pattern does P3-2-479U have?
P3-2-479U has 4 bolt holes on a 4.750" bolt circle, 0.500" hole diameter, M, 3.750 pilot. Match all three to the companion flange before ordering.
What part numbers does P3-2-479U replace?
P3-2-479U cross-references to 3-2-479, N3-2-479. Interchange data is for reference; compare the dimensions before substituting.
Is P3-2-479U in stock?
Yes. 50+ are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.