N° de pièce N90-70-28X Kit de brides, Longueur de boulon 0.75", Couple de serrage 52 ft-lb, Entre-axe 2.312"

N90-70-28X Strap Kit – SPL90 / SPL100 Series, 1.625" Cap, 0.75" Bolt, 52 ft-lb

The N90-70-28X is a strap kit for SPL90 and SPL100 series universal joints. The kit fits a 1.625" cap diameter. Bolt length is 0.75", thread diameter is .375-24, center-to-center spacing is 2.312", and torque specification is 52 ft-lb.

Specifications

• Part Number: N90-70-28X
• Series: SPL90 / SPL100
• Fits Cap Diameter: 1.625"
• Bolt Length: 0.75"
• Thread Diameter: .375-24
• Center to Center: 2.312"
• Bolt Torque: 52 ft-lb

When installing the N90-70-28X, torque the .375-24 bolts to exactly 52 ft-lb using a calibrated torque wrench. The 2.312" center-to-center dimension sets the strap plate span across the cap — confirm this matches the yoke ear spacing for the SPL90 or SPL100 application. The 1.625" cap diameter must be verified against the installed U-joint before ordering strap hardware.

The SPL90 and SPL100 series are high-torque designations above the 1610 and 1710 in capacity. Strap hardware for these series is not interchangeable with lower-series strap kits — confirm the cap diameter and center-to-center dimensions match your specific joint before installation. Do not reuse strap bolts after removal.