Part No. 3-3-788KX Slip Yoke 1410 Series, Splines: 1.375 x 16, Centerline To End 5.250

Two slip yokes can share the same series and spline specs while differing only in the center-of-U-joint-to-end dimension. The 3-3-788KX at 5.250" is 0.562" shorter in CL-to-end than the 3-3-1481KX at 5.812". That difference matters in applications where the transmission tailhousing is close to the driveshaft midpoint or where a center bearing limits the slip travel window.

The 1410 series handles significantly more torque than the 1310. Cap OD is 1.188" identical to 1350, but trunnion length extension in the 1410 joint improves angle capacity. Common in 3/4-ton and 1-ton pickup truck applications.

When selecting between the 788KX and 1481KX, measure the compressed and extended driveshaft length in your application. The slip yoke must maintain at least 1.5" of spline engagement at maximum droop and must not bottom on the output shaft at full compression. If your travel calculation falls between the two lengths, the longer yoke is the safer choice.

All slip yokes by series.

Not sure which slip yoke you need? Our transmission slip yoke guide covers spline counts, styles, and how to measure.