Part No. 3-28-97U Weld Yokes, 1410 Series, Butt Dia 2.344", Tube Dia Wall 3.000X0.095
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3-28-97U · 1410 Series Weld Yoke
- Part number
- 3-28-97U
- Part type
- Weld Yoke
- Condition
- New
- Brand
- UDS
- Series
- 1410
- Material
- STEEL
- Butt diameter
- 2.344
- Center u-joint to weld
- 2.125
- Tube diameter wall
- 3.000X0.095
- Weight
- 3 lb
Fitment
1410 series parts use 1.188" u-joint bearing caps on a 4.188" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
Alternative parts for 3-28-97U
Same fitment, another number or brand. Check the notes before you substitute.
| Add | Pic | Part # | Price | Series | Center U-J to Weld | Tube Dia & Wall | Material | Butt Dia | Brand |
|---|---|---|---|---|---|---|---|---|---|
![]() |
3-28-97 |
$20.31
|
1410 | 2.125 | 3.000X0.083 | STEEL | 2.844 | SPICER |
Fits 3-28-97U
Checked against the catalog measurements: these parts fit this one.
About 3-28-97U
The 3-28-97U designation follows Spicer's naming convention where "U" indicates the OEM-style balanced yoke (uncoated in the specification that follows). The 3.000"x0.095" tube at the 1410 series provides a medium-wall driveshaft appropriate for 1/2-ton truck rear shafts and 4WD front shafts in this capacity class. The 2.344" butt diameter is notably smaller than what would be expected for a 3.000" tube -- this suggests a stepped-bore yoke design where the pilot engages deep inside the tube rather than at the tube face, similar to the 1610-series approach noted earlier. Confirm your tube bore geometry matches this pilot before ordering this Spicer weld yoke. Cross-reference against Spicer's catalog for OEM fitment confirmation on your specific truck model and year.
Related Weld Yokes in the 1410 series
See the full table
4126-405A
ALUMINUM WELD YOKE 1410 4.000 X 0.083 Butt Dia: 3.850
$41.48In stock
4126-406A
ALUMINUM WELD YOKE 1410 4.000 X 0.125 Butt Dia: 3.757
$55.15In stock
4126-41A
Weld Yokes, 1410 Series, Butt Dia 3.757", Tube Dia Wall 4.000X0.125
$203.68In stock
4126-501A
Weld Yokes, 1410 Series, Butt Dia 4.888", Tube Dia Wall 5.000X0.065
$121.25In stock
4126-506A
Weld Yokes, 1410 Series, Butt Dia 4.757", Tube Dia Wall 5.000X0.125
$71.48In stock
4126-50A
Weld Yokes, 1410 Series, Butt Dia 4.757", Tube Dia Wall 5.000X0.125
$107.72In stock
3-28-557
Weld Tube Yoke 1410 Fits: 3.500 x 0.083 Tube, Butt: 3.344 Inch Centerl...
$15.78In stock
3-28-97
Weld Tube Yoke 1410 Fits 3.000 x 0.083 Tube, Butt: 2.844 Inch, Centerl...
$20.31In stock
3-28-97U questions
What series is 3-28-97U?
3-28-97U is a 1410 series weld yoke. Nominal 1410 dimensions are 1.188" bearing caps on a 4.188" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What tube size does 3-28-97U fit?
3-28-97U is machined for 3.000X0.095 driveshaft tube (outside diameter × wall thickness), with a 2.344" butt diameter. The tube must match both numbers for a correct weld fit.
Is 3-28-97U in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.
