The 3504-06 is a 1350 series pinion yoke that fits the Dana 44 differential. It has a spline count of 26 and a spline diameter of 1.146 inches, along with a hub diameter of 1.552 inches. The through hole measures 1.500 inches, and the center-to-end measurement is 3.000 inches. This yoke utilizes the Dana strap kit 3-70-28X.
This pinion yoke is compatible with various models, including the 1/2 Ton Dodge Pickup (1955-2002, front), 1/2 Ton GM Pickup (1960-1980, front), 1/2 Ton GM Pickup (1967-1972, rear), 3/4 Ton Dodge Pickup (1955-2002, front), 3/4 Ton GM Pickup (1960-1980, front), 420 (1958-1970, rear), Blazer (1969-1979, front), Bronco (1972-1996, front), CJ5 (1966-1975, rear), CJ6 (1966-1975, rear), CJ7 (1986, rear), CJ8 (1981-1986, rear), Commando (1966-1973, rear), F100 (1948-1979, rear), F150 (1967-1996, front), F250 (1959-1989, front), F350 (1979, front), Grand Wagoneer (1984-1991, front and rear), J10 (1972-1983, rear), Mark I (1950-1970, rear), Mark II (1950-1970, rear), Mark X (1958-1970, rear), Ram Charger (1974-1993, front), Rodeo (1993-1997, rear), Scout 800 (1967-1971, rear), Scout II (1972-1980, front and rear), Suburban 1/2 Ton (1969-1979, front), TJ (1997-2004, rear), TJ (2003-2005, front), Wagoneer (1971-1992, rear), Wagoneer (1974-1992, front), XJ (1986-1989, rear), XJ Sport (1986-1989, rear), XJR (1940, front), XJS (1976-1997, rear), XK8 (1961-1974, rear), and X-Type (1974-1995, rear). It can also be used on the Dana 35 rear, requiring a national seal 476441.