Use this guide to measure driveshaft length for most cars, vans, 2WD trucks, and some 4WD front and rear shafts.

Measure instruction: Please make sure to measure the driveshaft length when the vehicle is in the normal riding position.If you’re using Jack/Lift the axle must be supported on safety stands – not hanging down.

Measurement (A) - DRIVESHAFT LENGTH:
Measure from end of rubber seal on the transmission to the flat face of the end yoke or flange on the differential.

Measurement (B) - SPLINE EXTRUSION LENGTH:
Measure from end of rubber seal to end the of the transmission output. If spline is recessed in rubber seal, measurement can be noted as ø.

Measurement (A) - DRIVESHAFT LENGTH:
Measure from end of rubber boot extension on the transmission to the flat face of the end yoke or flange on the differential.

Measurement (B) - SPLINE EXTRUSION LENGTH:
Measure from end of rubber boot extension on the end of transmission output. If spline is recessed in rubber boot extension, enter ø.

One Piece Driveshaft Option One

Links

Use this guide to measure driveshaft length for most cars, vans, 2WD trucks, and some 4WD front and rear shafts.

Other Measuring Guides